AIC 6008 Uniflowmaster

  • Proven volumetric mechanical meter.
  • Suitable for engines up to 1000HP.
  • Accuracy better than +/- 1 % over the range.
  • Repeatability better than +/- 0.2 % over the range.
  • NPN open collector, up to 10 mA / 32 VDC.
  • 0,7ms pulse width.
  • 804 pulses per liter.
  • Size: 39 x 14 x 31 cm (filter included).
  • Weight: 14,3 Kg.
Technical info
AIC 4004 Veritas fuel flow meter

Technology

  • Proven volumetric mechanical meter with AIC systems patented electronic.
  • Unit supplied with a standard fuel filter.
  • For installation on the suction side of the engine
  • To be installed in vertical position only (max 30° angle)
  • Works on all engines.

Accuracy

  • Accuracy better than +/- 1 % over the range.
  • Repeatability better than +/- 0.2 % over the range.

Pulse signal output

  • NPN open collector, up to 10 mA / 32 VDC.
  • 0.7 ms pulse width
  • 804 pulses per liter

Electrical

  • 12 / 24 V operation.
  • Pump consumption: approx 50 Watts.
  • 30 mA consumption.
  • No interferences with existing vehicle on-board electronic (CAN-Bus).

Mechanical

  • Size: 39 x 14 x 31 cm (filter included)
  • Weight: 14,3 Kg

The AIC 6008 UNIFLOWMASTER is perfectly suited for :

  • Road and proving ground testing
  • Product bench marking
  • Dynamometer testing

Every AIC 6008 UNIFLOWMASTER can be delivered with the following “ready to go” dedicated accessories :

  • BC 3034 Board Computer.
  • DT 3080 GPS tracking system.
  • Signal cable for AIC display or logger (10 m).
  • Signal cable third party logger (10 m).
  • Signal cable of different length (on request).
  • Universal connexion kit, including various fittings.
  • Fuel hose or bio fuel hose.
  • Transport case

The AIC 6008 UNIFLOWMASTER can be ordered with the following options :

  • Third party calibration certification.
  • Bio fuel compatibility
  • 12V or 24V operation